There are two types of mixtures on sale, with which you can align the bulk floor – cement and gypsum. Cement mixtures are used to process any rooms. With their help, you can make a thin ball of the solution up to50 mm. Thanks to a sufficiently thin ball, the solution of the solution is reduced and you can stand on the floor and continue the finish without long expectations. Cement mixtures are significantly more expensive than gypsum mixtures. Gypsum mixtures are used to finish dry rooms with a layer thickness up to 1100 mm. In turn, the mass of gypsum and dries twice as long as cement. The manufacturer of the mixtures is extremely recommended to use gypsum mixtures for finishing wet rooms, since they can increase in volume and soften.
Starting to aligning the floors, you can go one of two ways: use a mixture of the same type for all rooms (for example, cement); or divide the premises into dry (dining room, living room) and wet (bathroom, kitchen, laundry) and apply cement and gypsum mixtures, respectively, to dry and wet rooms. If the developer opted for the use of several types of mixtures, then between the compounds of different floors you need to leave the gap.