I prefer to entrust the installation and repair of the toilet to the specialist. Most of the owners experience fear of plumbing filling in our apartments. But nothing is difficult in this, and you can perfectly cope yourself. Before proceeding to work, make sure that you have turned off the water. On the water supply pipe, it is necessary to block the shut -off valve. The most reliable way to fasten the toilet is its fastening to taffe. Tafta is made from a strong wooden board, which is then inserted into the flooring. Then she was mounted to the floor, with the help of nails, which are driven in a checkerboard pattern. By the way, if you have a laminate allock with a discount, then when flooding you may not be afraid that it will suffer.
But not to finish to the end, it is necessary that the nails protrude at 20 mm. Then a cement-sand mortar is poured with a seizure along with questionnaires on the floor. After drying the solution, begin to fix the toilet. Take ordinary screws, put the washers of rubber under their heads, and attach the toilet. But do it very carefully so as not to damage the toilet bed.
Then the release (the landlife section, is connected to the sewer tolerance) is inserted into the sewer bell and as a result we connect the flush tank.
Today, the installation of plumbing equipment is very expensive, so you can save a little and do everything yourself.