It often happens that when the furniture moves, and this is characteristic of large -sized objects and when they do not fit into turns, wall angles are touched. The result of this is chips and falling pieces of gypsum. In the event that during the construction before direct staining, the bases of the walls were strengthened, the damage acquires a slight character. The role of the metric corner just here lies in creating protection against damage. However, most of the old buildings during construction did not tend to use such a measure, as a result of which, even with regular staining of the surface, they become unusable.
First of all, a putty should be prepared, the application of which is made to the area where there are damage. After that, a reinforced strip should be cut out, after which it is glued to the angle. Clutching with a certain effort to the wall, they let go and let it dry for about two hours. Having dried up, putty can be applied to the tape, and it is important that the layer lay down evenly, which is aimed at preventing transitions. Now it remains to sand this area and make the final finish, for example, with wallpaper.