Given that the floors play an important role in order to effectively use the time as some aspects of our point in the house, which must be at the highest level. Be a well -organized working group and choose the appropriate type of area, given, ideally, if you have the following qualities: appearance, efficiency, wear resistance, thermal and sound insulation, resistance to water and water vapor, durability and simplicity of maintenance, while it prevails Elasticity and sliding. After the material is made of a wear -resistant layer, we have the following types of flooring:
Wooden floors
1. Wooden floors
a. Floor floors:
Gross floor underlying layer with a thickness of 18-24 or 28-80mm and 300mm width of fixed connections or interval.
The floors of this gender have on one side the underlying layer of 24.28 or 38 mm and a width of 100-300 mm.
Floors from grooves and a comb from boards or cabinets 24.28.38.48 mm thick and a width between 100-160 mm and processed data from the grooves and the crest of the edge.
B. Floors-parquet of oak or lamella beech with a thickness of 17-22 mm, length 200-450 mm and 30-90 mm wide. In order to combine each floor tabs, the parties are processed in different ways.
• LU type LU with grooves on both sides, and two other grooves
• U with grooves on all four edges
• Type L throws a swallow tail, installed from bitumen mastic. Removed beech or oak 10 mm with straight edges – laminated parquet.
Parquet floors can be installed on the floor from the board, plywood or glued to concrete.
The blades are installed along the walls, 1-1.5 m in length and 65-115 mm in width, the thickness is equal to the width of the floor.
The purpose of the parquet and wall sheathing is covered with parquet gives an unusual appearance.