In any repair work there are some errors and, accordingly, plaster painting is no exception, now we will list what exactly they are. The composition of paints can be quite different, they are glue, enamel, lime, acrylic, and, accordingly, flavor defects are also directly different from them.
Defects in the process of working with paints based on lime in the same case, respectively, if the technology is not observed, such defects are difficult to remove, these defects are eliminated by complete alteration of the work. Such defects can also be attributed to: Suppies, Extermination of paint, folds, spray, smudges, rusticated, fat spots. This is not a complete list of flaws, but such the most common. You will need to buy enamel in rust in Moscow.
The shallowing of the paint happens so if very little adhesive composition was added directly to the preparation process or, as an option, added large – granular chalk. Correct such a defect or spraying a non -very strong solution of adhesive composition or, as an option, repeated coloring.
Exclamation of the paint happens in the same case, therefore, if a lot of adhesive composition was added to the paintwork, or, as an option, partitions were not good, even when several such strata of the paint were applied to the same place and, therefore, therefore, therefore, therefore, therefore, therefore, therefore, therefore, therefore, therefore, therefore, therefore, therefore if you have not removed the outdated strata of paint. These defects are removed by the complete removal of the paint or, as an option, shader with a wet painting brush. When shading, the upper layer of paint is removed, it must be re -applied.
Superficial rust on the painted surface, as you know, may appear, therefore, if water or, as an option, tarry substances (in that case of staining of a tree) fled on the surface of the color. Fat spots arise only in cases where the oily spots do not dry on the surface of the painting. You can also remove these defects only with removing the paint and, in addition, the surface processing for painting.
Folds spray, smudges appear, therefore, if the paintwork is not well divided enough. For suitable work, the paintwork needs to be diluted in very correct proportions.
Now let’s talk about defects with enamel and oil paints. Defects are directly similar in them, but of course, they can appear for other reasons, moreover, they need to remove them very much, differently.
Traces of painting brushes are such a very frequent flavor defect, occurs in the process of working with a fairly thick paint. Eliminate this defect by removing such a layer of paint, as well as applying a layer of proper density.
There is a defect given as a bloating, it appears if the unlucky tree is painted. You can also remove it, therefore, if you remove the entire paintwork, let the wood dry.
Here are the most common defects when staining.