The fence of the housing is always one of the most basic tasks of the developer. If in a number of Western European countries the construction of such fences using natural wood is practiced, then, unfortunately, other materials are applied to us. Although this species was undeservedly forgotten, because the use of such natural material allows you to preserve the type of land close to nature, while environmental safety – one hundred percent will be observed one hundred percent.
When erecting such structures, it must be remembered that wooden fences need to be processed with protective and antiseptic compositions. The life of the entire enclosing structure depends on this. To date, there are several technologies to increase the stability of the enclosing structures by an order of magnitude.
One of the most popular is the processing method of impregnation. In the ideal case, all the blanks of your fence should undergo processing in stationary conditions, by immersion in a bath with a special solution. But in real cases it is almost impossible to achieve this. Using the high -weight installation of Karcher, it is possible to achieve the penetration of the working fluid to a depth of up to five millimeters. For the cost of the fence – this will affect insignificantly, and a good appearance will retain for a long time.
A cheaper way to process elements of wooden fence is a manually coating with a stain. This composition (depending on your choice), both alcohol and water -based, has a good antiseptic effect on wood. In addition, the existing industry produces a very large number of shades. It will not be difficult for you to choose the necessary color based on your aesthetic taste – from a light tone of pine to a real red tree. Perhaps everything! It is only worth considering that the stain is a very concentrated tool, so it must be diluted according to the instructions, or water or alcohol -containing mixtures.
But the most favorite finish method that is used is painting. The main thing is to remember that giving fences are subject to constant thermal influences. Therefore, before painting, it is necessary to treat the surface with soil – it will increase the surface adhesion. After that, you can apply a layer of paint, the color of which will depend only on your taste. Existing types of colors – acrylic, oil, made on the basis of nitro -containing substances – allow you to realize any, even the most extravagant pattern. The main thing is to remember that heterogeneous colors should not be mixed in any case, because this is fraught with damage not only to the material, but also.
The only minus of painting is the fragmentation of the coating. In two or three years, depending on the quality of the paint, it will be necessary to perform work again. Therefore, it is recommended to use the compositions of stamps of Pinotex, Senezh and others. These products are the role of an antiseptic, antipigena (increases fire resistance), and at the same time allows you to paint the fence in the color you need. The resistance of such a coating deserves only flattering words. For seven to ten years, the color remains almost unchanged.
In order to increase the aesthetic effect of the fence, it is recommended to apply several layers of varnish on top of the painted surface. The glossy will emphasize the brilliance of your fence, and matte – on the contrary, will draw attention to the material from which the fence is made, or to the color in which it is painted.