In order to make your home really your fortress, you will have to insulate its walls from the inside and outside. Insulation of external walls is quite accessible in terms of laboriousness for each. How to do this with only warm plaster, we will tell you. The first stage in the insulation of the external walls is their thorough stripping from old spots, pieces of paint, extra old elements. For the best result of the wall, it is recommended to disconnect. By the way, if you urgently need a welding inverter, then you can always order it by passing the exiled link.
The mixture for insulation of the house must be diluted in a large container. A bag of loose putty should be poured into a 15 liter bucket, a third filled with water. After 5 minutes, the swollen mixture is considered ready. It is better to apply such a mixture to the outer walls of the house in spring or dry autumn, when the stable temperature is held +5 – +10 degrees. The heat, like drying the plaster in the sun, is undesirable. Moreover, it is worth protecting the walls of the house from direct sunlight during their insulation and drying.
You can apply warm plaster using a grater in two, or even in three layers. But each of the layers must only be applied after the previous. The final stage of such work is a grout and grinding walls. Do not forget to be careful in the process of work, because when getting wet, the mixture forms the alkali. The ingress of the solution into open areas of the body can form a bomb.