When working with communications, the distance from the jacuzzi to the wall should be at least 40 cm. When you remove water pipes, be sure to follow the linear dimensions of the jacuzzi. This is due to the fact that the bath can do not fit on the wall. The drain hole should not be placed no more than 10 cm from the floor. Otherwise, the jacuzzi should be lifted by arranging a special podium. And one more advice. In construction stores, Chinese fakes often come across branded hoses. They are not adapted for great pressure of water and after some time will break. It is best to purchase hard connection tubes – they are reliable and will last a long time. There are owners of jacuzzi who insure their bath with hydromassage. You can also use such a service. In addition, it may be necessary to install gearboxes to adjust water pressure. Another nuance that requires attention is ventilation windows and removable panels. The latter are necessary for access to communications in the case of built -in jacuzzi.
Having finished connecting the bath to the systems, it is necessary to attach it to the floor. Put the jacuzzi close to the wall and drill through special holes. Thus, you will strengthen the bath. No matter how hard you try, the gap between the wall and the bathroom may stay. A sealant will come to your aid. It must be taken into account that only sanitary or neutral sealant can be used for this. They guarantee protection against mold and fungus in places of their use. At the same time, there are masters recommend a regular cement solution for the same purposes. You do not need to compile the cracks if you place a jacuzzi in the center of the bathroom.
Dzhakuzi installation is almost complete. Now you just need to test the bath. Check in turn all the functional purposes of the jacuzzi and the quality of the connection. Starting to use the jacuzzi, remember that at first it is necessary to pour several liters of cold water into it and only then turn on the hot.