In order for the independent installation of interior doors to go well, first of all, you need to measure the width, height and depth of the doorway, in order to determine the type of door leaf. The standard dimensions of the interior doors are 600×1900 mm, 600×2000 mm, 700×2000 mm, 800×2000 mm and 900×2000 mm. If the dimensions of the doorway do not coincide with the standard ones, then it may be necessary to increase or decrease it, which will be much cheaper than making doors to order.
However, if there is no desire or means to reduce the opening, you can choose swing doors. For example, for an opening size 1300×2050 mm, you can choose two doors size 600×2000.
The depth of the opening allows you to determine the need. Width of standard jambs, boxes, etc. D. usually 7 cm, and if the wall is thicker, then the inhibits will be necessary.
Doors installation is not a very complex process that does not require special building skills. You will need you, a hammer, roulette, a chisel, a screwdriver, a drill with a drill, level, hacksaw and knock, as well as screws, mounting foam and furniture plugs.
First, decide on the side of where the door will come off, and cut the handle on the chosen side of the door with the help of the rude and the chisel. As for the loops, everything is much simpler here: modern loops are universal, and they can be placed on any side of the door without a tower.
The door frame is assembled by door size. At the same time, screwdriver, knock and hacksaw are used. Then the box is installed in the opening, aligned in level and attached to the wall with self -tapping screws, under which recesses are pre -depressed. Then the recesses are closed with furniture plugs, and the voids between the box and the wall are poured with mounting foam. After that, you can safely hang the door leaf and nail the platbands.