To lay linoleum on the floor surface, two methods are used and on mastic. Leding linoleum in the first way worse than the second way. Typically, this method is laid in linoleum in the hallway to the old parquet or plank floor covering. Before putting linoleum, it is necessary to carefully remove the surface of the floor, otherwise small pebbles will immediately show themselves on the front side of the linoleum. Now you can roll linoleum to the floor surface, let it depart for a day and then carefully cut it out in size. Then all the edges of the linoleum must be pierced with thick cloves with a wide hat at a distance of five centimeters from each other around the perimeter. By the way, do not forget to install a new watch male diesel, they go well with the new linoleum.
The disadvantage of this method of laying linoleum is that the edges of the edge quickly begin to crumble, so they must be covered with a wide baseboard. If you got the connecting seam in the middle of the floor area, then it is necessary to close the edges pierced with cloves with special metal rocks. This will prevent the destruction of the edge and water falling under linoleum. The thresholds are attached to the floor surface using screws of the desired size. Linoleum laid in this way will last a longer period.