Any leafgger machine is indispensable in the production of metal bends and any similar work. There are several types of leaf beam machines, each of which is distinguished by its functions and features. Consider a leafgger machine with a rotary beam.
The method of action of the leaf beam machine with a rotary beam.
The main difference between leaf -beam machines with a rotary beam from the brown -bended presses is that during the pressing process, the material is deformed due to the fact that the exposure to the vertically walking working body is exposed to it. This body presses the part in the prism below.
A completely different way of working in a leaf beam with a rotary beam – the processed sheet is clamped between two clamping traverses (which are a table and a clamping traverse). At this moment, the beam traverse, which was installed on the bearings (in the disconnected state, is in an upright position), is lifted up and the process of flexion of the metal is taking place.
This structural difference provides many advantages that other models of leaf beam machines do not have.
The accuracy of the leaf beam machine
Leaf -beam machine has high accuracy. Due to this advantage, when carrying out the molding process in the leaf -beam with a rotary beam, the metal processed is tightly fixed using a clamping traverse and a table. The probability of slipping of the metal sheet is excluded, which increases the accuracy of the size of the material produced.
Using a leaf beam machine with a rotary beam, the probability of damage to the surface of the processed metal disappears. Usually, during pressing, the processed sheet of metal under weight is pressed into the prism, as a result of which it can not only deform, but also be damaged, forming unwanted scratches. When the machine is operated by a leaf beam with a rotary beam, the beam traverse carefully squeezes the metal sheet of metal, observing a certain axis. Thanks to this, no shifts arise, which means that damage is absent.
The widespread use of leaf -beam machines.
As mentioned above, any production specializing in work with metal does not do without leaf beam machines. A huge number of profiles that roofers are constantly used, tiners (folding, bend of edges) cannot be made using presses. For their production, a special equipment is needed.
Also, downtime may arise due to re-equipment of the main parts of the press. If you use to produce such parts – leaf beam machines with a rotary beam, you can make the most famous and popular profiles, and without the use of expensive tools. Also, the time for the manufacture, for the re -equipment of equipment, which means, is saved.
Simple solution using a leaf beam machine with a turning point.
With the help of gypesian machines with a rotary beam, many problems are solved. For example, such a situation is known when, when working on leaf metal processing, a situation arises when on a fairly large details (entire sheet metals) it is necessary to heat up only minor flexors.
When using the press, bending occurs with the movement of the entire processed metal. And for the processing of large, heavy metals, the corresponding efforts will be required, which are necessary in order to spring and support the material when flexible. On the machines of leaf bends, the material does not move completely. Only the piece of material that appears in front of the table and the traverse moves. Due to the fact that there are stops of stops, as well as restrictions on the depth of processing, a significant part of the processed metal remains on the supporting tables and does not move manually.