Do not know where to invest the money that you collect? Put them in the repair of floors in your home or in your apartment. For floors in the house, we use a rogue board with a thickness of 3-5 centimeters. For work you will need: wedges, hammer, nails and possibly a small grinder. Before laying the board, it is necessary to lay and fix the vapor barrier film or dense plastic film in two layers. The edges of the film should be 10-15 centimeters above the floor. If you can’t put the film with a whole piece, it is necessary to lay pieces of overlap at 5-10 centimeters and fasten them together with tape.
Most importantly and correctly install the first board and correctly. It is best to do this with a cord stretched from wall to wall. This will help to avoid distortions in the future. We fasten the first board with nails so that they are hidden by the baseboard. The next board is inserted into the groove of the first board and so on. If the spike does not climb into the groove, then we remove it with a grinder with a petal circle. Thus, we collect 5-6 boards.
Next, score a bracket into the beam. Between the bracket and the board, we drive the prepared wedges. This is necessary in order to remove the gaps between the boards. There should be no gaps between the floor boards and gaps.
We squeeze the last board using installation and attach to the beam, not forgetting that the nails should be under the skirting boards.