Before the process of filling the solution, first of all, should be the readiness of the trench and a sand substrate is made, after which they are already moving to the installation and fastening of the foundation, as well as assembly of the reinforcing frame. A special groove for the supply of concrete is built from the boards.
Want to buy a new stove for yourself, but do not know where cheaper? We advise you to buy stoves in Anapa inexpensively. After passing the link we specified, you can find out more detailed information.
Through this same groove just the same, concrete is supplied from the interfering device. This method has one drawback associated with the fact that when the solution is supplied, it falls into one point, and this, in turn, creates problems associated with an even distribution over the surface. However, in some cases, the stratification of the foundation is also noted. The solution to the problem with the uniform distribution of the layer is that the supply is made to different points, which turns out to be the movement of this gutter itself. In the absence of this possibility, it is allowed to make a groove a little longer than the usual. This can be done by applying several boards, which ultimately laying out polyethylene. It is possible to achieve monolithic in the course of such a process due to the constantly flowing process of supplying solution. In case of complexity, you will have to make special seams where solid concrete and fresh contacts.