Irrigation systems for irrigation of the site are superficial – for a drip strain and underground, designed for circular irrigation.
After the marking is performed, they move to earthwork and dig a trench system.
You should make sure that the bottom of the trenches is leveled.
Mount a pvc pipes system.
All joints of the pipes should be sealed.
The laid pipe system is instilled.
At the end of the installation, tests of the irrigation system connected to the water supply are tested.
Sources of water
When watering, it is very inconvenient to pull the hose throughout the site. This can be avoided if the sources of water are arranged through the territory, prudently bringing the pipes to them. When laying such pipelines, Liebherr technique is often used, which is redeemed at good prices. You can familiarize yourself with the conditions and catalog of the redeemed technique here
It is advisable to draw up a plan for a water supply network so that if necessary it is easy to find a damaged area. This will protect in the future from many problems.
Water sources can be large wooden tubs, old baths, metal and plastic containers, various tanks. So that they organically look on the territory of the site, they can be decorated.
Electricity
It is impossible to imagine modern life without electricity. It will also be needed in the garden, since you will probably want to install sources of local lighting, you will need to bring the line to the water or drainage pump, etc.
For such needs, even before the milestone starts in hell, a cable must be laid along the paths. You need to do this below the ground level, enclose the wire in the copper pipe and arrange all the outputs with sockets.
Soil preparation
After the site is divided into zones, the garden is laid, it is necessary to prepare the ground for planting. To do this, first remove the fertile layer, thoroughly dig up the subfamor layer, pre -introducing organic fertilizers, and return the fertile layer to place.