Cats are incredibly curious animals that cannot stand closed doors. In some families, interior doors are never closed to the end, leaving a gap sufficient for a cat can pass into it. However, not all owners like this option, and there are situations that require the door to be tightly closed. An excellent solution would be a small hole in the lower part of the door of onyx. You can make it yourself in just half an hour.
Preparing tools for work
To make a door for a cat, you will need a cat itself (nothing will work out without its participation: someone must control your activity!), a ruler, a pencil, an electrician or a saw, a piece of plastic, a pair of piano loops or rotary hinges, the doors are veneered or ordinary.
Stage One: Remove the door from the loops, put it on the floor and with the help of a pencil and ruler we draw in the middle in the lower part a square with a side length of 10 or 15 centimeters. The larger your pet, the greater the hole should be, otherwise it can get stuck.
Stage second: sawing around the perimeter of the picture. We do it carefully and slowly.
Stage third: draw a hole. In principle, the passage for the animal is already ready and you can safely hang the door in place, but a gaping hole with zeded edges will look unaesthetic. A neat frame along the perimeter of the hole will correct the position.
Fourth stage, for aesthetes: make a door. From a piece of plastic (it is light, and the cat can easily push his head) cut out a square, the sides of which are slightly smaller than the hole. We put the piano loops or rotary hinges on the top edge and fasten the plastic square to them. Now you can hang the door in place and show the pet how to use the new design. However, he himself will deal with her very quickly, you can be sure of this!